# /etc/zaptel.conf:
# Digium/Clone T100P EXAMPLE:
# Here is an example of a configuration where an T100P single T1 card is used 
# for connecting a single T1 PRI circuit with 23 voice channels

span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
loadzone = us
defaultzone=us

# FOR A RBS WinkStart T1 YOU WOULD USE SOMETHING LIKE THIS:
# span=1,1,0,esf,b8zs
# e&m=1-24
# loadzone = us
# defaultzone=us
# 
# FOR AN ANALOG T1 ChannelBank YOU WOULD USE SOMETHING LIKE THIS:
# span=1,1,0,esf,b8zs
# fxoks=1-24
# loadzone = us
# defaultzone=us
#